2009.09-2013.06 南京航空航天大学 材料科学与工程 学士学位
2013.09-2018.11 南京航空航天大学 材料加工工程 工学博士学位
2017.09-2018.09 Purdue University 机械工程 联合培养博士
(1) 特种车辆设计制造集成技术(2024)，主持
(2) 科技委前沿创新项目|课题 (2022) ，主持
(3) 国家自然科学基金青年科学基金 (2020)，主持
(4) 江苏省自然科学基金青年基金项目 (2019)，主持
(5) 中国科协青年人才托举工程 (2023)，主持
(6) 国家重大工程项目，分系统主任设计师
(7) 科工局基础科研重大 (2020)，主要参与
(8) 科技委前沿创新项目|课题 (2020)，主要参与
(9) 江苏省工程技术研究中心，主持
发表学术论文20余篇，部分论文如下：
1. Wang, L, Li H., Song Y. et al.,Investigation of dendrite growth, Nb segregation during laser IN718 deposition via volume of fluid-phase field modeling,Journal of Materials Research and Technology,Volume 21,2022,Pages 404-415
2. Wang, L.; Li, Y.; Ding, J.; Xie, Q.; Zhang, X.; Wang, K. Problems in Welding of High Nitrogen Steel: A Review. Metals 2022, 12, 1273. https://doi.org/10.3390/met12081273
3. Wang, L.*, Li, H., Wang, K. et al. Simulation of heat transfer and dendrite growth during the arc deposition of nickel-based superalloy via finite element-phase field modeling. Appl. Phys. A 128, 447 (2022).
4. Wang, L*.; Li, H.; Huang, Y.; Wang, K.; Zhou, M. Effect of Preheating on Martensitic Transformation in the Laser Beam Welded AH36 Steel Joint: A Numerical Study. Metals 2022, 12, 127.
5. 李赫,王磊*,黄勇,周明,周琦,王克鸿.预热温度对AH36激光焊缝组织及硬度的影响[J].焊接,2021(10):25-28+62.
6. 王磊, 李赫, 黄勇, 王克鸿, 周琦. 各向异性对焊接凝固裂纹影响规律的相场法模拟[J]. 焊接学报, 2021, 42(12): 83-86. doi: 10.12073/j.hjxb.20210309001
7. Wang, Lei*, Huang Yong, Yang Dongqing, et al. "Multi-scale simulation of grain growth during laser beam welding of nickel-based superalloy." Journal of Materials Research and Technology, 2020 9(6): 15034-15044.
8. 王磊, 许雪宗, 王克鸿, 黄勇, 彭勇, 杨东青. 中厚板7A52铝合金光纤激光焊接接头组织与性能[J]. 焊接学报, 2020, 41(10): 28-31, 37. doi: 10.12073/j.hjxb.20200518001
9. Wang, Lei*, and Kehong Wang. “Investigation on Microstructural Patterns and Hot Crack in the Molten Pool via Integrated Finite-Element and Phase-Field Modeling.” Journal of Manufacturing Processes, vol. 48, 2019, pp. 191–198.
10. Wang Lei, Wei Yanhong，Chen Jicheng, et al. Macro-micro Modeling and Simulation on Columnar Grains Growth in the Laser Welding Pool of Aluminum Alloy. International Journal of Heat and Mass Transfer, 2018, 123C: 826-838.
11. Wang Lei, Wei Yanhong, Zhan Xiaohong, et al. Simulation of dendrite growth in the laser welding pool of aluminum alloy 2024 under transient conditions. Journal of Materials Processing Technology, 2017, 246: 22-29.
12. Wang Lei, Wei Yanhong, Zhao Wenyong, et al. Effects of welding parameters on microstructures and mechanical properties of disk laser beam welded 2A14-T6 aluminum alloy joint. Journal of Manufacturing Processes, 2018, 31: 240-246
13. Wang Lei, Wei Yanhong. Onset of Curved Dendrite Growth in an Al-Cu Welding Pool: A Phase Field Study. JOM, 2018, 70: 733–738.
14. Wang Lei, Wei Yanhong, Zhan Xiaohong, et al. A phase field investigation of dendrite morphology and solute distributions under transient conditions in an Al–Cu welding molten pool. Science and Technology of Welding and Joining, 2016, 21(6): 446-451
15. Wang Lei, Wei Yanhong, Yu Fengyi. Simulation of primary dendrite arm spacing in an Al–Cu welding molten pool. Materials Science and Technology, 2017, 33(7): 846-853
16. Wang Lei, Wei Yanhong, Yu Fengyi, et al. Phase‐field simulation of dendrite growth under forced flow conditions in an Al–Cu welding molten pool. Crystal Research and Technology, 2016, 51(10): 602-609
申报发明专利10余件
[1] 魏艳红,王磊,刘仁培,余枫怡,刘景涛. 基于相场法的瞬态下焊接过程微观组织演变模拟方法[P]. 江苏省：CN106407623B,2019-10-18. 已授权
[2]王磊,李赫,郝戌龙,郑凯文,黄韵珈,王克鸿. 一种改善镍基超合金增材成形质量与凝固裂纹敏感性的工艺方法[P]. 江苏省：CN113732443A,2021-12-03. 已授权
[3]王磊,李赫.解强,王克鸿,侯博隆,郭靖. 一种基于相场法的Ni-Nb超合金Laves相预测方法:CN202111557550.X[P]. 2022-04-29.
[4]王磊,李奕辰,李浩冉,王克鸿,刘景涛,李欣达,黄海燕. 一种基于激光沉积的厚板高氮钢的连接方法:CN202111557549.7[P]. 2022-04-05.